You can compose a standard necklace stand out of wooden candle holders and dowels. if you expect ought compose a necklace stand can a budget, attempt using thesis towel rolls and cardboard. at addition, you can compose a sole necklace stand using tree branches and a wooden plaque. Simply collect your necklace stand, win it with warm glue, and rent it dry. Once your necklace stand is dry, you can hang your necklaces from your new, handmade accessory.
1. Using Wooden Candleholders and Dowels
![]()
1) discover the middle of your dowel with a ruler and mark it with a pencil. criterion the length of your wooden dowel, and spread your measurement at half ought discover the center. when you discover your center, compose a little mark with a pencil or pen accordingly you can clearly look it.
- For example, if your wooden dowel is 5''in (13 cm), the middle will exist at 2.5''in (6.4 cm).
- You can buy wooden dowels at most family supply and boat stores.
![]()
2) utilize warm glue about the peak of the candle holder base. You can utilize a wooden candle holder about 6'6'' in (15'41'' cm) tall, and pick because robust tapered or pedestal holders. situate your candle holder perpendicular can a clean, even surface. rent your warm glue gun warm up, and tug can the trigger ought release the glue. utilize glue coarse the method about the peak of your candle holder.
- This way, you can easily win the wooden dowel ought the peak of your candle holder.
- You can apply candle holders at most boat stores or thrift stores.
![]()
3) understand the wooden dowel horizontally can peak of the candle holder base. middle the mark you made can the wooden dowel with the peak of the candle holder. Then, lay the dowel can peak of the candle holder horizontally. magazine down can the dowel with gentle stress accordingly they persist ought each other.
- Use the middle point you marked can the dowel ought carry out your placement.
4) Spray an even clothing of primer after about 30-40 minutes. wait about a half hour because the glue ought set, then lay your necklace holder can peak of a layer of newspaper or flexible descend cloth. Spray a light, even layer of primer can coarse of your necklace stand.
- This helps the dye persist ought the necklace stand.
![]()
5) cover your jewelry situate with spray dye after the primer dries. wait about 15-30 minutes because your primer ought dry, then spray an even clothing of spray dye can peak of your necklace stand. You can spray a second clothing can peak of your situate after the first clothing dries (about 20 minutes).
- Use whatever spray dye color you'd like!
6) rent your situate sit because 24 hours ago adding details or necklaces. desert your necklace stand at a dry location where it will no exist disturbed. Then, you can hang your necklaces across the horizontal dowel. if youâd like, accessorize your necklace stand with wooden objects, sham flowers, or other trinkets. Simply jam some warm glue can the bottom of your object, and magazine it ought your situate because 30 seconds.
- For example, you can glue can artificial flowers because a springtime theme.
- Other love details contain wooden birds, letters, or rhinestones.
2. Using thesis Towel Rolls and Cardboard
![]()
1) chop your cardboard ought 11'' in ~ 17'' in (28 cm ~ 43 cm) ought compose the base. discover a slice scrap of cardboard, and mark the cardboard ought 11'' in (28 cm) broad and 17'' in (43 cm) expect using a ruler and pencil. Then, chop it out using a link of scissors.
![]()
2) glue your cardboard ought a slice of fabric. buy 1 yard of fabric ought utilize because your cardboard basis and ought cover your necklace stand. after you tidy the cardboard because your base, lay the cardboard at the middle of your fabric. Then, cover the edges of your cardboard with warm glue, and wrap the fabric about the cardboard. when you arrive a corner, dab a sheet of glue, magazine down can the fabric, add another dab of glue, then fold the remaining fabric about the corner.
- You can utilize cotton, polyester, crushed velvet, or fabric blends ought compose your necklace stand.
- Trim off any remaining fabric using your scissors.
- The phase you applied glue is your bottom of your necklace base, and the even phase is your top.
![]()
3) chop a 2'' in ~ ¼'' in (5.08 cm ~ 0.64 cm) slit at the middle of 1 towel roll. criterion your thesis towel list with a ruler, and discover the center. compose a mark using a pen. Then, criterion about 2'' in ~
¼'' in (5.08 cm ~ 0.64 cm), and chop the thesis towel list ought compose a little slit.
- This is where you will insert the other thesis towel roll.
- You can understand a second thesis towel list up ought your slit ought compose sure it is the precise size.
![]()
4) Wrap the thesis towel list at fabric, leaving an opening because your slit. utilize glue from your warm glue gun down the thesis towel roll, and row it up with the edge of your fabric. lay the fabric onto the glue and understand it down because 5-15 seconds with your fingers. tidy the fabric ought the size of your roll, and hold your slit exposed because you compose your cuts. utilize another row of glue can the other side, and cover the pause of your roll.
- You can utilize glue ought the inner of the thesis towel list ought win the fabric about the slit and about the edges.
![]()
5) cover a second thesis towel list at fabric and win it with warm glue. With this roll, you don't read ought care about maintaining the slit. Simply row your thesis towel list with warm glue, tug the fabric onto the glue, and utilize another row of glue. tug the pause of the fabric ought the glue, and understand the fabric about your list because about 10-20 seconds. utilize glue ought the inner of the thesis towel roll, then fold your ends inner ought cover them with fabric.
- If you read additional fabric, tidy it off with scissors.
![]()
6) list up a newspaper or newspaper and insert it into your second roll. ought help uphold the weight of your necklaces, fill the inner of your second list (the one without the slit) with paper. You can because robust list up a little newspaper or utilize a slim stack of newspapers. list the thesis up tightly at the broad end, and insert it into the thesis towel roll.
- This helps remainder the weight of your necklace stand.
![]()
7) glide the second list inner the slit of the first list ought mix them. after you material your newspaper inner the second roll, insert the end of the list inner the slit of the other roll. They to easily glide into each other. if you are having trouble, pinch the end of the list with your fingers, and place it inner the slit.
- This creates the pause of your necklace stand.
![]()
8) utilize glue ought the second list and lay it at the middle of your base. ought mix your thesis towel rolls ought your cardboard base, simply utilize glue about the basis of your second list (no slit). cover the outer ring thoroughly, accordingly the glue can fasten ought the fabric of your stand. Then, lay the thesis towel list with the glue phase exposed onto the middle of your necklace stand.
9) rent your necklace stand dry because 1-3 hours. Once your necklace stand is assembled, it is best ought rent the glue dry because a little hours. This way, the warm glue can fasten ought the fabric thoroughly and the situate will no topple over. Then, simply hang your jewelry from the horizontal thesis towel roll.
- This creates a covered necklace stand can a budget!
3. Making a Tree branch Stand
1) Locate a basis branch and love branches at your yard or the park. choose a branch about 12'18'' in expect and ¼'' in (0.64 cm) broad accordingly you can easily training a screw into the base. at addition, emerge because smaller branches about 5'10'' in expect ought utilize because your necklace hangers. accumulate your branches and bring them family with you.
2) jam a nickel-size quantity of warm glue onto the middle of your plaque. You can utilize a beveled, round, or square plaque among 4'' in ~ 6'' in (10 cm ~ 15 cm) and 9'' in ~ 12'' in (23 cm ~ 30 cm). rent your warm glue gun warm up because 1-2 minutes, and tug the trigger ought release the glue. utilize a dab of glue at the middle of your wooden plaque about where you expect the basis of your necklace stand ought begin.
- It's okay if you utilize too much glue. You can dab it away with a thesis towel, or cover it with dye afterward on.
- Purchase your wooden plaque from any main boat store.
![]()
3) lay the end of your branch at the glue and understand it because 30-60 seconds. after you utilize glue ought your plaque, understand your largest branch at the glue accordingly it can set. magazine down can the branch with gentle pressure, and release your understand after about 1 minute.
- Your branch to remain straight up can its own. if it does not, utilize some more glue and understand your branch because another minute.
4) training a screw over both the plaque and the wood. when your warm glue is dry and your branch is secure, lay a screw can the bottom of your wooden plaque direct beneath your branch. You can bow the screw into the lumber a little epoch ought hold it at place. Then, row your training up with your screw, and gently tug the trigger. training the screw over both the wooden plaque and your tree branch.
- Be sure ought understand your branch firmly and hold an eye can your fingers ought obstruct any injury.
- This adds supper ought your branch, accordingly it won't autumn can when you lay your necklaces can the stand.
![]()
5) glue additional branches ought your main branch ought fill your necklace stand. Using your scissors, chop the end of the branch ought apply a even surface. Then, dab a little bead of glue can the bottom of your branches, and understand them up ought your main branch. understand the branch because about 30 seconds accordingly it adheres ought the main branch. disperse the branches about your main branch ought fill at the top. You can lay the branches wherever youâd like, and you can utilize because many because you desire!
- If you expect ought hang many necklaces, add 3-7 branches.
- If you expect ought show impartial a little necklaces, add 1-3 more branches.
![]()
6) pick ought utilize spray dye or acrylic dye ought cover your necklace stand. if you utilize spray paint, lay your necklace stand outside, and spray the dye can coarse sides of the branch and plaque. if you are using acrylic paint, jam some dye into a little bowl or plate, duck a little brush into the paint, and cover the branches and basis entirely.
- If you expect ought utilize a second coat, wait about 10-30 minutes because the first clothing ought completely dry.
7) rent your dye dry because 1-3 hours ago hanging your necklaces. Your necklace stand is end after you utilize paint! However, compose sure your dye is completely dry ago you lay your necklaces can the stand. if the dye is calm wet, you can apply dye can your necklaces.
- To restrain how dry your dye is, gently affect your pinky finger ought the branch. if any dye comes off, wait another 30 minutes and attempt again.
